ohmytime and GitHub
a571bb6f91
Alignment
2023-11-30 10:36:34 +08:00
ohmytime
e915b84172
Fix FM87.5 can't save to channel
2023-11-30 10:32:06 +08:00
Sjef Verhoeven PE5PVB
d5760f3c2a
Changed use squelch in to use squelch
...
`When disabled, squelch will be switched off and can't be set.
2023-11-23 14:50:11 +01:00
ohmytime
45ba255367
MEM band optimization
...
1. Empty(defalut) station not tune
2. Change channel color for different status:
Mem preview: Channel Empty → InsignificantColor , Exist → SignificantColor
Mem storage: Channel Empty → SignificantColor , Exist → InsignificantColor
2023-11-23 17:21:34 +08:00
ohmytime
be5e253be9
Add Band None for AM & FM
...
Now can completely disable AM/FM bands
2023-11-22 08:56:25 +08:00
Sjef Verhoeven PE5PVB
1c9c5dc815
Fix memory position 99
...
Also set FM memory channels to auto stereo by default.
2023-11-18 18:22:26 +01:00
Sjef Verhoeven PE5PVB
9b1561a6b8
Extended USA MW range
2023-11-17 21:57:38 +01:00
Sjef Verhoeven PE5PVB
72e3b595a4
Added FM scan sensitivity option.
2023-11-17 10:52:47 +01:00
Sjef Verhoeven PE5PVB
8c3e34e352
Added menu option to adjust scan sensitivity for AM
2023-11-11 13:17:36 +01:00
Sjef Verhoeven PE5PVB
046642c306
Removed 80MHz from SPI selector, won't work.
2023-11-02 11:16:33 +01:00
Sjef Verhoeven PE5PVB
c64faf1df3
SPI speed added to flash storage and menu cleanup
...
Moved ARS selection to tft_espi config
2023-11-01 22:22:46 +01:00
Sjef Verhoeven PE5PVB
b5d7d053d2
Added menu option for default MW stepsize, menu cleanup
2023-10-30 16:49:28 +01:00
Sjef Verhoeven PE5PVB
a27fa13c66
Added function to store stereo/mono status and BW mode on memory channels
2023-10-29 00:23:25 +02:00
Sjef Verhoeven PE5PVB
8d85e318a7
More fixes and added eeprom space for BW and MS
2023-10-28 23:37:50 +02:00
Sjef Verhoeven PE5PVB
4f73645364
Added 200kHz stepsize for FM
2023-10-23 20:44:56 +02:00
ohmytime
22f85087ef
Can change SPI speed in menu
...
Now you can change SPI speed to avoid interference.
2023-10-22 14:24:30 +08:00
Sjef Verhoeven PE5PVB
51576b316f
Added time-out timer
...
You can choose for off, 15m, 30m, 60m and 90m.
Timer will reset everytime you use a button or the rotary.
Radio will go in full deep-sleep, including the processor.
To wake up, just jiggle the knob.
2023-10-15 20:17:09 +02:00
Sjef Verhoeven PE5PVB
95c405ed54
Add extra TMC detection
2023-10-13 22:53:56 +02:00
Sjef Verhoeven PE5PVB
eafd385998
Added AF Mixed flag
2023-10-13 16:47:06 +02:00
Sjef Verhoeven PE5PVB
29b2f79a56
Added Fast PS
...
When enabled:
When tuning to a new station PS is shown immediately. After two complete PS cycles normal PS detection is activated. This can cause incompete or faulty PS direct after tuning, which will recover.
Disabled:
After two complete PS cycles the PS is shown. This can take some longer time to show PS but will prevent errors as much as possible.
In previous builds fast PS was already enabled, but can now be disabled if wanted.
Also a small fix: when RDS is lost and level drops below low level threshold, the textcolor was not changed.
2023-10-12 12:11:40 +02:00
Sjef Verhoeven PE5PVB
0545c62350
Extended memory channels to 99
2023-10-11 14:33:15 +02:00
Sjef Verhoeven PE5PVB
a5181c2463
Last state SW BAND/AUTO stored in flash and made it more user friendly
2023-10-10 17:42:25 +02:00
Sjef Verhoeven PE5PVB
0997590b97
BW for AM and FM is now stored in flash
2023-10-03 17:00:07 +02:00
ohmytime
496d7320f2
Fix deemphasis value error
2023-08-21 11:25:12 +08:00
ohmytime
2ce25a2888
Add FM deemphasis
2023-08-17 08:03:55 +08:00
ohmytime
ea425c7417
Add AM antenna attenuation
2023-08-15 20:32:17 +08:00
Sjef Verhoeven PE5PVB
c5350b3860
Bugfixes
...
- Show PI errors is fixed
- RDS error detector fixed
- Battery indicator fixed
- Regional AF's now have a leading 'r'
- Edge beep on SW bands added
- Beep on boot only when edge beep is enabled
- Added Stationlist ID, this is used for identification in Stationlist log
- Code optimalisation
2023-08-14 20:30:38 +02:00
Sjef Verhoeven PE5PVB
ab94e952dd
Several updates
...
- New font for frequency
- Added auto AF sort on/off
- Mask regional AF frequencies
- Some changes that make tuning a bit faster
- Small bugfixes
- Code cleanup
2023-08-13 20:52:11 +02:00
ohmytime
431938df97
Add co-channel detector on AM
2023-08-08 22:59:05 +08:00
Sjef Verhoeven PE5PVB
d258d1dd3c
Added RT buffering as menu option
2023-08-06 16:38:26 +02:00
kevin
c85bb22cc0
Show battery value or percent
2023-08-03 18:57:06 +08:00
Sjef Verhoeven PE5PVB
4cf3877b39
Bugfixes
2023-07-29 15:52:33 +02:00
Sjef Verhoeven PE5PVB
ffd0c59d22
Changed lowest OIRT frequency to 65MHz
...
Most TEF chips can't handle < 65MHz
2023-07-28 15:54:07 +02:00
Sjef Verhoeven PE5PVB
b7f8d1263f
Squelch value bug while searching fixed
...
Changed start frequency OIRT
2023-07-27 23:47:39 +02:00
Sjef Verhoeven PE5PVB and GitHub
5e2ebcf670
Merge pull request #144 from ohmytime/Add_model_selector
...
Add Model selector & some optimization for China portable
2023-07-27 14:40:34 +02:00
kevin
fe83036c78
Add Model selector & some optimization for China portable
...
Touch screen part need to be done.
2023-07-27 20:36:16 +08:00
Sjef Verhoeven PE5PVB
9db65c7f71
Whoops
2023-07-27 14:33:09 +02:00
Sjef Verhoeven PE5PVB
1e1db918b9
Fixed offsets in menu page 1
2023-07-27 14:31:47 +02:00
kevin
2773c9bcbd
Rotating while screen off
2023-07-26 19:04:00 +08:00
kevin
d6a913e1ac
Add Chinese display support
2023-07-25 09:17:23 +08:00
kevin
d16ecc50e5
Add separate OIRT band & user band selection
2023-07-23 14:15:06 +08:00
Sjef Verhoeven PE5PVB
1f899329a1
Update GUI
2023-07-22 18:33:52 +02:00
Sjef Verhoeven PE5PVB
3478ae08fa
GUI optimalisation and bugfixes
...
Mute symbol added
2023-07-20 22:55:12 +02:00
Sjef Verhoeven PE5PVB
7369a5ea90
Fixes
...
Small AF improvements
Flash optimalisation
Store last stereo state in flash
2023-07-16 14:11:07 +02:00
Sjef Verhoeven PE5PVB
406fe4762f
Added AF
2023-07-16 01:20:02 +02:00
kevin
43af19f3ad
Use macro definitions to manage EEPROM
...
□Make it easy to reorganization EEPROM items.
□Rename : fmminstepsize -> fmdefaultstepsize
2023-07-14 23:42:40 +08:00
Sjef Verhoeven PE5PVB
8aaeb72d81
Several fixes and updates
...
- Error output for XDRGTK finally compatible
- Added dBuV/dBf/dBm selector
- Added display softstart (just because it looks nice)
2023-07-12 21:58:18 +02:00
kevin
1b9fc3f73f
Add more power options
...
Change " % " -> "%" in BuildDisplay().
2023-07-11 22:38:15 +08:00
kevin
88d26a9a6d
Add Screensaver
2023-07-10 21:30:52 +08:00
kevin
c30b7f603e
Add 100K step for FM
2023-07-08 13:56:16 +08:00