From 342d2f9e455f1f820124174e457c88b5cfd029de Mon Sep 17 00:00:00 2001 From: andimik Date: Thu, 28 Dec 2023 17:42:38 +0100 Subject: [PATCH] some typos fixed --- Menu-options-explained.md | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/Menu-options-explained.md b/Menu-options-explained.md index 2b9a8f8..406581b 100644 --- a/Menu-options-explained.md +++ b/Menu-options-explained.md @@ -10,7 +10,7 @@ Here you can change the communication speed with the display, can be useful if a # Audio Settings ### Set volume -This will allow you to set the default volume level. Useful for DIY radio's without volume knob. On portable devices, leave it at 0dB +This will allow you to set the default volume level. Useful for DIY radios without volume knob. On portable devices, leave it at 0dB ### Beep at band edge When switched ON, you will here a beep when band edge is reached. You will also hear a beep when the edge of a shortwave band is reached. @@ -60,7 +60,7 @@ Set the time when the radio will go to stand-by. This option is to reduce batter Set the threshold for RDS error processing. The higher value, the higher change RDS parsing contains errors. Can be useful on disturbed FM signals ### Region -Set the RDS region. When switched to America the PTY will be changed to RBDS and also a callsign will be shown under the PI code. +Set the RDS region. When switched to America the PTY will be changed to RBDS and also a call-sign will be shown under the PI code. ### Show underscore in RDS This will replace with underscores in PS and RT texts. @@ -75,7 +75,7 @@ When enabled the PI code will also be shown, even when there are errors in the R Useful when you are on the road. When a certain threshold is reached, the radio will quickly scan for another transmitter with the same program, but with a better signal. ### RT buffering -This will buffer the radiotext and show it when the A/B flag changes. It will give you a more smooth display of radiotext. +This will buffer the Radiotext and show it when the A/B flag changes. It will give you a more smooth display of Radiotext. ### Auto sort AF Enable this to automatically sort the AF list from lowest to highest frequency. @@ -103,10 +103,10 @@ When the value is triggered, RDS will be disabled and data to the display slows When you switch this ON, the audio volume is reduced when static is received ### FM Noise blanker -Can, in some cases, be helpful to reduce interference from noise sources. +Can (in some cases) be helpful to reduce interference from noise sources. ### FM default stepsize -Set the default stepsize to 50kHz, 100kHz or 200kHz. +Set the default step size to 50 kHz, 100 kHz or 200 kHz. ### Select FM band Set the FM bands which should be available when toggling the bands with the band button @@ -119,7 +119,7 @@ Select the right de-emphasis, set to 75 µS when you are receiving signals in So Reduces audio volume when receiving static ### AM Noise blanker -Can, in some cases, be helpful to reduce interference from noise sources. +Can (in some cases) be helpful to reduce interference from noise sources. ### AM RF Level offset Adjust this to your needs. When using an active antenna the value should be negative. You can play with this value to get the best DSP performance on AM bands @@ -128,7 +128,7 @@ Adjust this to your needs. When using an active antenna the value should be nega Select the AM bands which should be available with the band selector ### Show SW wavelength -This will show the broadcast band next to the frequency, for example "49m". +This will show the SW band next to the frequency, for example "49m". ### AM CoChannel Detection Set the sensitivity for the AM CoChannel detector. When CoChannelling is detected it will be shown on the screen. It's only a detector, not a filter. @@ -141,7 +141,7 @@ Antenna attenuator setting for AM # Connectivity ### USB Mode -Set if you want to conntect to XDRGTK or RDS Spy when using USB. When switched to XDRGTK, the baudrate is set to 115200 bps. When switched to RDS Spy, the baudrate is 19200 bps. +Set if you want to connect to XDRGTK or RDS Spy when using USB. When switched to XDRGTK, the baudrate is set to 115200 bps. When switched to RDS Spy, the baudrate is 19200 bps. ### Wi-Fi Active Enable or disable the WiFi connection. When the connection has established, your IP address is shown on this line. @@ -156,10 +156,10 @@ You can also set the password for XDRGTK connection over IP. Note: only 2.4 GHz Wi-Fi is supported. ### Stationlist Client IP -When you use Stationlist, set the IP address of the device which runs Stationlist (for example, the IP address of your PC) +When you use Stationlist (or Stationlist for Android), set the IP address of the device which runs Stationlist (for example, the IP address of your PC or Android phone) ### Stationlist ID -When you have more radio's connected to Stationlist, you can set the ID here. With this you can detect which radio is controlling Stationlist +When you have more radios connected to Stationlist (or Stationlist for Android), you can set the ID here. With this you can detect which radio is controlling Stationlist # About software Show the credits of the people who made this software possible.