Updated Menu options explained (markdown)

Menu-options-explained.md

@@ -1,62 +1,118 @@
 # Main Settings
 ### Model selector
-This option will allow some default functions to be preset for the selected model.
+_Base, Portable, Portable Touch_
+Select the right radio type. Base is mostly used for DIY models. If your radio has a touchscreen, choose Portable Touch. Don't forget to calibrate the touch screen before it can be used. 
 
-### Allow tuning during screensaver
+### Stop screen wake on tune
-When set to ON the screensaver won't be de-activated while tuning
+_On/Off_
+When set to ON the screensaver won't be de-activated while tuning.
+
+### Auto Power off
+_Off/15/30/60/90 minutes_
+Automatically put radiochip, display and microcontroller to stand-by after not pressing any button for x minutes.
+
+### Use Squelch
+_On/Off/Auto_
+When your radio is equiped with a seperate squelch dial, you can switch this function ON. If you want to have an auto squelch, set the value to AUTO.
+
+### FM AGC
+_84-92 dBµV_
+Set the threshold point for AGC on FM reception
+
+### AM AGC
+_94-102 dBµV_
+Set the threshold point for AGC on AM reception
+
+### Select FM band
+_NONE/FM/OIRT_
+Set the FM bands which can be selected with the band button.
+
+### Select AM band
+_NONE/LW/MW/SW_
+Set the AM bands which can be selected with the band button.
+
+### 5 sec. bandbutton press
+_Disabled/Power off/Screen off_
+Set the action when holding the bandbutton >5 seconds.
 
 ### Dynamic SPI speed
-Here you can change the communication speed with the display, can be useful if a distortion caused by the data to the display occurs
+_Default/10/20/30/40/50/60/Auto MHz_
+Here you can change the communication speed with the display, can be useful if a distortion caused by the data to the display occurs. Advice to use the Auto setting.
 
 # Audio Settings
 ### Set volume
+_-10 - +10 dB_
 This will allow you to set the default volume level. Useful for DIY radios without volume knob. On portable devices, leave it at 0dB
 
 ### Beep at band edge
+_Off/On_
 When switched ON, you will here a beep when band edge is reached. You will also hear a beep when the edge of a shortwave band is reached.
+Also when adding a log to the logbook a short beep is sounded as confirmation.
 
 ### Audio output
-The radio is capable of having full MPX output on the audio jack. Useful for analyzing stereo and RDS signals. Note, that the left channel is mono and only the right channel is full MPX.
+_Stereo/MPX_
+The radio is capable of having full MPX output on the audio jack. Useful for analyzing stereo and RDS signals. Note, that the left channel is mono and only the right channel is full MPX. For normal use, leave it on STEREO.
 
-For normal use, leave it on STEREO.
+### Stereo seperation threshold
+_Off/30-60 dBµV_
+Set the signallevel where to reduce stereo seperation. Can be usefull to reduce noise in stereo reception on TEF6686/6688 models.
 
-### Set high cut corner frequency
+### High cut corner frequency
+_1500 - 7000 Hz_
 When High cut threshold is triggered a soft reduction of high tones will be applied. You can set the corner frequency here.
 
 ### Set High cut threshold
+_Off/30-60 dBµV_
 Here you can set the threshold for the soft reduction of high tones. It will be activated if the signal level drops below the set value.
 
+### FM Deemphasis
+_Off/50/75 µS_
+Set the FM deemphasis on FM reception. Use 75 for America, use 50 for rest of the world.
+
 # Display settings
 ### Language
+_English/Dutch/Polish/Croatian/Greek/Romanian/German/Czech/Hungarian/French/Bulgarian/Russian/Ukranian/Italian/Chinese/Norwegian/Spanish/Portuguese/Serbian/Finnish/Danish_
 Here you can select the menu language.
 
-### Set Display brightness
+### Display brightness
-Set the preferred display brightness from 0 to 100%.
+_1-100%_
-
+Set the preferred display brightness.
-### Show squelch
-When ON, the squelch settings are showed in the main screen. When your radio doesn't have a squelch knob, you can set this to OFF.
 
 ### Modulation meter
+_On/Off_
 With this option you can enable/disable the modulation meter. You can switch it off when you're receiving noise from the display hardware on weak signals. Switching off will reduce data to the display.
 
-### Theme
-Here you can set your favorite color theme.
-
 ### Screensaver
+_Off/3-10-30-60 Sec._
 Select a value to set when the screensaver will start.
 
 ### Screensaver options
+_1/25/50% Brightness, Screen off_
 Select the option what to do when screensaver is triggered.
 
 ### Battery options
-With this option you can set how to show the battery status. Switched off will show you a battery icon with a green fill, when battery goes lower, the green fill will reduce, you can also choose to show the voltage or percentage.
+_Off/Show percentage/voltage_
+With this option you can set how to show the battery status. Switched off will show you a battery icon with a green fill, when battery goes lower, the green fill will reduce.
 
 ### Signalmeter unit
-Here you can setup the units used for the signal meter. You can choose between dBµV, dBf or dBm.
+_dBµV/dBm/dBf_
+Here you can setup the units used for the signal meter.
+
+### Show Clock
+_On/Off_
+Show the clock on display when available.
 
 ### Time out timer
 Set the time when the radio will go to stand-by. This option is to reduce battery live when you leave the radio on unattended. The timer will be reset after every button press.
 
+### Theme
+
+Select the desired color theme.
+
+### Frequency Font
+_Aura2/Motoya/Roubenstil/Classic/Modern/Comic_
+Select a font for the frequency readout in the main screen.
+
 # RDS Settings
 ### Show RDS errors
 Set the threshold for RDS error processing. The higher value, the higher change RDS parsing contains errors. Can be useful on disturbed FM signals