From b648142264ff091b8e1c421dd0fc4732b6594555 Mon Sep 17 00:00:00 2001 From: andimik Date: Thu, 28 Dec 2023 17:37:28 +0100 Subject: [PATCH] WiFi --- Menu-options-explained.md | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Menu-options-explained.md b/Menu-options-explained.md index f70a146..2b9a8f8 100644 --- a/Menu-options-explained.md +++ b/Menu-options-explained.md @@ -144,10 +144,16 @@ Antenna attenuator setting for AM Set if you want to conntect to XDRGTK or RDS Spy when using USB. When switched to XDRGTK, the baudrate is set to 115200 bps. When switched to RDS Spy, the baudrate is 19200 bps. ### Wi-Fi Active -Enable or disable the WiFi connection. When connection, your IP address is shown on this line. +Enable or disable the WiFi connection. When the connection has established, your IP address is shown on this line. + +Remark: If not configured so far, please use the next menu item. ### Configure Wi-Fi -Set the radio in Wi-Fi configuration. Follow the instructions to set the Wi-Fi connection with the help of your smartphone. You can also set the password for XDRGTK connection over IP. Note: only 2.4 GHz Wi-Fi is supported. +Set the radio in Wi-Fi configuration. Follow the instructions by connect your smartphone or your PC to the temporary WiFi starting with ESP... Then you need to chose the preferred WiFi and type in the password. + +You can also set the password for XDRGTK connection over IP. + +Note: only 2.4 GHz Wi-Fi is supported. ### Stationlist Client IP When you use Stationlist, set the IP address of the device which runs Stationlist (for example, the IP address of your PC)